.
There are 42 products.
Active filters
• Not necessary to purchase if buying a Pyramis sink as included in purchase
• Item code is a spare purchase
• Perfectly fits 30mm cut out tap not used
• Perfectly matches Pyramis stainless steel finish
• Material: stainless steel and plastic thread
• One mini trap and flexi pipe with sealant fittings
• Serves as a kit for the following sinks :
-Double Bowl Double Drainer
- Single Bowl 0.8mm
- Royal Mini Round Sink
Spare waste kit for single bowl Pyramis sinks
• Replacement kit for Screwfix Pyramis sinks
• Waste kit for the following single bowl Pyramis sinks:
• Includes: two traps and one plastic flexi pipe waste fitting with sealant fittings
• Waste kit for the following Pyramis bowl and a half stainless steel kitchen sinks:
- Relia 1.5 Bowl Undermount Sink
- Dione 1.5 Bowl Undermount Sink
- Galaxy 1.5 Bowl Sink
- Athena 1.5 Bowl Sink
- Vera 1.5 Bowl Sink
- Alea 1.5 Bowl Sink
• Includes: one trap and one flexi fitting pipe with sealant fittings
• Includes: trap, L flexi fitting pipe, sealant fittings along with square overflow fitting specific to Lydia sinks
• Optional addition that replaces default waste kit supplied with sink
• Finish: artisan brass
• Brand: Clearwater
• Makes part of a full brass kitchen fittings theme for your kitchen
• Centerpiece fitting that brings together the brass fittings of cabinet with that of brass tap to complete the brass kitchen theme
• Single bowl required qty: 1
• 1.5 bowl required qty: 2
• Not needed as extra if you purchase sink with matching finish
• Will match perfectly as part of a brass theme with:
- Brass taps
- Brass handles
- Brass knobs
- Brass hinges
• Belfast sink specific version also available
• Optional addition that replaces default waste kit supplied with sink
• Finish: regency copper
• Brand: Clearwater
• Makes part of a full copper/rose gold kitchen fittings theme for your kitchen
• Centerpiece fitting that brings together the copper fittings of cabinet with that of copper tap to complete the copper kitchen theme
• Single bowl required qty: 1
• 1.5 bowl required qty: 2
• Not needed as extra if you purchase sink with matching finish
• Will match perfectly as part of a copper theme with:
- Copper taps
- Copper handles
- Copper knobs
- Copper hinges
• Belfast sink specific version also available
• Overflow to match the Artisan brass sink waste
• Contains both a round and square overflow outlet
• 1 x hose to connect overflow to waste included
• Compatible with both 90mm and Belfast sink specific wastes of matching finish
• Material: PVD
• Overflow to match the Regency Copper sink waste
• Contains both a round and square overflow outlet
• 1 x hose to connect overflow to waste included
• Compatible with both 90mm and Belfast sink specific wastes of matching finish
• Material: PVD
• Connection for dishwasher drainage
• Pipping to connect two bowls together to flow to universal waste outlet
• UK connection: bottom female thread
• EU connection: top male thread
• Female thread: 54mm
• Male thread: 46mm
• Finish: white
• Black protection ring included
• Pack of 12
• Firm fixing
• Clip to sink, screw into worktop
• Sold as a spare pack
• Included with purchase of all Pyramis onset sinks
• Perfect addition to kitchen sinks with a 90mm hole
• Finish: polished chrome
• Size: 92mm
• Finish matches with many high quality kitchen taps
• Touch button to flip open
• Buy 2 for 1.5 bowl sinks
• Easy to remove inner filter
• Brand: Clearwater
• No more problem bins and fewer trips outside
• It could not be easier or more convenient
• Fits to just about any kitchen sink
• Noise Level: Less than 70db
• Power: 550w (1/2hp)
• Weight: 3kg
• RPM: 2600rpm
• Includes an air switch
• Brand: Xcelerator



• Sizes: 1/2 and 3/4 inch
• Lengths:
- 1/2 - 42mm
- 3/4 - 47mm
• Used for a straight rigid joint on half inch copper pipe
• Finish: brass
• Angle: 90 degree
• Length to elbow:
- 1/2 - 44mm
- 3/4 - 50mm
• Used for a making a joint on half inch copper and Qualpex joint
• Finish: brass
• Lengths (bottom/extension):
- 1/2 - 45mm/63mm
- 3/4 - 55mm/70mm
• Used for forming a three way T joint on rigid half inch copper and Qualpex
• Connection fitting to convert UK plumbing fittings to be compatible with Irish tap installations
• Finish: brass
• UK size: 14.7mm
• Irish size: 15mm
• Used for isolating the mains water supply for servicing or repairs
• Provides hassle free water isolation for repairs and servicing
• Length: 45mm
• Finish: galvanised steel
• To isolate the mains water feed to your domestic taps
• Mainly installed under kitchen sinks
• Avoids airlock
• Avoids having to turn off mains water supply
• Length: 50mm
• Finish: galvanised steel
• To isolate the mains water feed to your domestic taps
• Mainly installed under kitchen sinks
• Avoids airlock
• Convenient for areas under sink where accessibility is difficult
• Lengths:
- Straight piece: 60mm
- 90 degree piece: 52mm/48mm to elbow
• Finish: white
• Connects water pipe of kitchen sink to washing machine
• Eliminates need for additional water piping through wall
• Finish: white
• Excellent multi-functional plumbing solution
• Eliminates need for additional water piping through wall
• Connects water pipe of kitchen sink to washing machine and dishwasher
• Finish: white
• Easy to fit
• To form 45 degree joints waste water pipes
• Finish: white
• Easy to fit
• To form 90 degree joints on waste water pipes
• Finish: white
• Easy to fit
• To form straight joints on waste water pipes
• Finish: white
• Easy to fit
• To form three way joints on water pipes
• Flexible and easy to install
• Used for taps and washing machines
• Size: 1/2inch
• Length: 6 meters
• To fit 1/2 inch piping
• Width: 25mm
• Thickness: 0.075mm
• 100% PTFE tape
• Finish: white
• A simple and effective method of preventing leaks
• For sealing joints on all types of pipe fittings and compression joints
• Essential on all Marley pipe joints
• Adhesive for all PVC pipes and fittings
• Finish: galvanised steel
• Used for isolating the mains water supply
• Avoids airlocks
• Removes need to turn off mains water on the road
• Lengths:
- 1/2" - 64mm
- 3/4" - 70mm
• Finish: brass
• Used for isolating the mains water supply
• No second pipe for external wall required
• Avoids airlocks
• Removes need to turn off mains water on the road
• Lengths:
- 1/2" - 55mm
- 3/4" - 63mm
For 35mm tap hole
For 35mm tap hole