Filter by

Apply

Worktop fittings

Active filters

€32.45
Place hot pot and pans safely on the worktop
• Stainless steel style worktop rods look great in all kitchens
• 6 x 300 and 450mm lengths
• Enables you to place hot pans on the worktop without ruining it 
• Each rod is backed with self adhesive heat resistant tape
• No need to rout your worktop saving time and mess
• Easy to apply
• Looks great on matt, gloss, solid wood or granite worktops
• Tested to withstand very high temperatures, water and food splillages
€3.15
Suitable for joint sealing between worktops
• Used to seal a joint between two lengths of worktop
• Straight joiners
• Suitable for use with 30mm and 40mm worktops to cosmetically finish a joint
• Available in 3 colours
• Length: 630mm
• Easily cut to required length
• Suitable for classic formica worktop
€2.50
Worktop ends suitable for raw ends of worktops
• Postform range of worktop ends
• Used for covering the raw ends on worktops
• Length: 630mm
• Easily cut to required length
• Suitable for classic formica worktop
€3.60
Postform range of worktop joiners online
• Used for inserting in the gap where the edge of one worktop meets end of an adjacent worktop in a corner situation
• Available in two colours
• Length: 630mm
• Can be easily cut
• Suitable for classic formica worktop
€3.40
Suitable for raw ends of worktops
• Used for covering the raw ends on worktops
• Available in two colours
• Length: 600mm
• Easily cut to required length
• Suitable for duropal profile worktop
€3.40
Suitable for joint sealing between worktops
• Used to seal a joint between two lengths of worktop
• Straight joiners
• Suitable for use with 30mm and 40mm worktops to cosmetically finish a joint
• Available in two colours
• Length: 630mm
• Easily cut to required length
• Suitable for duropal profile worktop
€4.95
Suitable for inserting in the gap where the edge of one worktop meets end of another worktop
• Used for inserting in the gap where the edge of one worktop meets end of an adjacent worktop in a corner situation
• Available in two colours
• Length: 630mm
• Can be easily cut
• Suitable for duropal profile worktop
€3.25
Suitable for raw ends of worktops
• Used for covering the raw ends on worktops
• Available in two colours
• Length: 630mm
• Easily cut to required length
• Suitable for square profile worktop
€3.50
Suitable for joint sealing between worktops
• Used to seal a joint between two lengths of worktop
• Straight joiners
• Suitable for use with 30mm and 40mm worktops to cosmetically finish a joint
• Available in two colours
• Length: 630mm
• Easily cut to required length
• Suitable for square profile worktop
€4.95
Suitable for inserting in the gap where the edge of one worktop meets end of another worktop
• Used for inserting in the gap where the edge of one worktop meets end of an adjacent worktop in a corner situation
• Available in 3 colours
• Length: 630mm
• Can be easily cut
• Suitable for square profile worktop
CARPENTERS_CHOICE.gif
€249.95
Europe's best selling worktop jig to suit up to 700mm width worktops
• Best selling worktop jig in Europe From Unika
• Pin included
• Width: 700mm
• Templates in jig to facilitate 250-700mm cuts in worktop
• 90 degree sided jointing
• Corner solution
• Marking for breakfast bar leg
• Pilot hole for hinge
• 3 bolt slots
• 100 degree radius ends
• Diamond cutting technology used in the jig's manufacturing to ensure 100% precision
• Includes instructions

Unika Worktop Jig Features
€8.25
To stick worktop strips to end of open worktop
• To fix matching end strips to worktop
• Very easy to peel and apply on both sides
• Done once, creates a permanent bond
• Material: hard PVC covered in acrylate adhesive
• Max temperature resistance: 70°C
• Width: 40mm
• Length: 5 metre roll
€4.35
To avoid blackening and scorching of frame of hob cutout over time
• Heat reflective tape to protect worktop at points of cutout for hob
• Radiant heat resistant
• Material: aluminium
• Width: 50mm
• Length: 1 metre roll
€9.45
Suitable for use in a corner unit
• For use in corner unit when two doors are meeting to avoid seeing a gap
• Available in two colours
• Length: 630mm
• Easy screw fixing on the back of door
Worktop clamp
Out-of-Stock
€0.75
Suitable for joining two worktops
• Steel clamp for joining two lengths of worktop together
• Two 35mm diameter holes must be drilled at each worktop edge and a slot cut between the two holes
• The nut is then tightened to draw the two worktops together
• Finish: zinc plated

We have everything to make your kitchen worktop fully functional. Our range of worktop fittings, Postform classic profiles, bolts, clamps and more ensure things are properly levelled, supported and provide an excellent finish. Available in various sizes and finishes. Order online for home delivery or click and collect in Dublin.

0