Filter by

Brand

Brand

Apply

Active filters

€2.75
Nickel plated steel

• Material: steel nickel plated
• Soft and gentle closing kitchen door hinge
• Built in piston for slimline look
• Drilling diameter: 35mm
• Drilling pattern: 45mm

Plate Needed:DTC soft close clip on plate
*** Plate not Included ***


SOFT_CLOSE.gifREQUIRES_PLATE.gif

€2.25
Nickel plated finish
• Material: steel nickel plated
• Soft and gentle door closing
• Built in piston for slimline look
• Drilling diameter: 35mm
• Drilling pattern: 45mm
• 17mm crank

• Plate Needed: DTC soft close clip on plate
*** Plate not Included ***

SOFT_CLOSE.gifREQUIRES_PLATE.gif
€2.60
Nickel plated finish
• Material: steel nickel plated
• Soft and gentle door closing
• Built in piston for slimline look
• Drilling diameter: 35mm
• Drilling pattern: 45mm

• Plate Needed: DTC soft close clip on plate
*** Plate not Included ***

SOFT_CLOSE.gifREQUIRES_PLATE.gif
€5.45
Nickel plated steel
• Material: steel nickel plated
• Soft and gentle door closing
• Built in piston for slimline look
• Drilling diameter: 35mm
• Drilling pattern: 45mm

• Plate Needed: DTC soft close clip on plate
*** Plate not Included ***

SOFT_CLOSE.gifREQUIRES_PLATE.gif
€3.60
Hinge for laminate board
• Material: steel nickel plated
• Specifically designed for laminate board
• Overlay fitting
• Used for doors as thin as 10/12mm
• Commonly installed in schools and laboratories
• Drilling diameter: 35mm
• Drilling pattern: 45mm

SOFT_CLOSE.gif
€0.95
Non soft close hinge used in conjunction with the DTC soft close hinge
• Material: steel nickel plated
• Drilling diameter: 35mm
• Drilling pattern: 45mm
• Clip on mounting system
• Non soft close hinge used in conjunction with 1207000
• Use on doors where you don't need every hinge to be a soft close hinge, cutting down on cost


• Plate Needed: DTC soft close clip on plate
*** Plate not Included ***

SOFT_CLOSE.gifREQUIRES_PLATE.gif
€0.45
For use with all DTC soft close hinge range
• Material: steel nickel plated
• For use with all DTC soft close hinge range
• Fixed with chipboard screws
• Cam height adjustment: +/- 2mm
• Suitable for 18mm board range
€0.30
0mm plate with euro screw
• Material: steel nickel plated
• For use with all DTC soft close hinge range
• Fixed with chipboard screws
• To be clipped to 110 degree DTC hinge
• Suitable for 18mm board

€0.50
For use with all DTC soft close hinge range
• Material: steel nickel plated
• For use with all DTC soft close hinge range
• Fixed with chipboard screws
• Special extra high plate for use in framed kitchens
• Sometimes used in conjunction with 1207003

€1.25
Can be used with the soft close mechanism
• Material: steel nickel plated
• Drilling diameter for hinge cup: 35mm
• Drilling depth: 11.2mm
• Drilling pattern: 45mm
• Fixed with chipboard screws
• Side adjustment: +3/-0.5mm

• Plate Needed: Clip on plate
*** Plate not Included ***

REQUIRES_PLATE.gif
€2.00
Satin nickel finish
• Material: steel nickel plated
• Drilling diameter: 35mm
• Drilling pattern: 45mm
• Clip on mounting system

Plate Needed: DTC clip on wing plate
*** Plate not Included ***



SOFT_CLOSE.gifREQUIRES_PLATE.gif
€0.20
18mm DTC carcass plate
• Material: steel nickel plated
• Fixed with chipboard screws
• Suitable for 18mm board
€0.30
For use with DTC non soft close hinges in the range
• Material: steel nickel plated
• Fixed with chipboard screws
• Cam height adjustable +/- 2mm
• Suitable for 18mm board
• For use with 1206160
€0.20
Nickel plated slide on plate
• Material: steel nickel plated
• Slide on mounting
• Fixed with chipboard screws
DTC slide on hinge 110°
Out-of-Stock
€0.45
Slide on nickel plated hinge
• Material: steel nickel plated
• Drilling diameter for hinge cup: 35mm
• Drilling depth: 11.8mm
• Fixed with chipboard screws
• Side adjustment: +3/-0.5mm
• Depth adjustment: +4/-0mm
• Slide-on plate mounting system

• Plate needed: DTC slide on plate
*** Plate not Included ***

SOFT_CLOSE.gifREQUIRES_PLATE.gif
€1.05
Hinge for appliance doors
• Face flush hinge for door in front of kitchen appliances
• Hinge fits flush into plate for full concealment
• Cup diameter: 35mm
• Minimum door space 34mm
€0.20

• Brand: Emuca
• Material: steel
• Finish: brushed nickel
• To match face frame hinge
• Height adjustment: +/- 2mm

0