Filter by


Trend router technology

Active filters

Trend dovetail cutter
Dovetail cutters for Trend craft dovetail jigs
• These cutters are for Trend craft dovetail jigs
• D: 12.7 mm
• C: 20 mm
• OL: 60 mm
• A: 104 degrees
• Shank diameter: 6.35mm(1/4in)
Twin sided flute cutter
• Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising
• Use on softwoods, hardwoods, MDF, plywood and chipboard
• All cutters have a bottom cut feature
• Recommended speed: 1000-20000 RPM
• D: 35 mm
• OL: 60 mm
• Shank diameter: 12.7cm(1/2in)
Trend pocket hole plug cutter
For use in a pillar drill on making plug holes 
• Tool steel plug/pellet cutter
• Use in a pillar drill to allow plugs to be made to cover the pocket hole pockets
• Allows plugs up to 52mm long to be created in end grain
• Shank diameter: 6.35mm (1/4 inch)
Trend round over ovolo
Self-guiding cutters for rounding over edges
• Self-guiding cutters for rounding over edges
• They are supplied with two bearings
• Use the larger bearing when creating round over cuts
• If the cutter is lowered, a top quirk can be produced
• Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece
• Does not require a side fence
• Shank diameter: 6.35mm(1/4in)
Trend self guided chamfer...
Router cutting bit with self-guiding chamfer
• Self-guiding chamfer/bevel cutter
• Bearing follows the board beneath
• D: 32 mm
• C: 12.7 mm
• B: 9.5 mm
• A: 45 degrees
• Shank diameter: 6.35mm (1/4 inch)
Trend self guided trimmer
Cutting bit used for trimming plastic or plywood overlays
• Used for trimming plastic or plywood overlays
• Also for copy profiling with a template
• D: 9.5 mm
• C: 12.7 mm
• B: 9.5 mm
• A: 90 degrees
• Shank diameter: 6.35mm(1/4in)
Trend template profile
Cutting bits used mainly for rebating and trimming edges
• Shank mounted bearing profilers are ideal for template guidance
• Use for rebating and trimming edges only
• Extra care must be taken to avoid cutter breakage
• D: 12.7mm
• C: 25.4mm
• Shank diameter: 6.35mm(1/4in)
Trend worktop jig cutter pack
Work jig for router
• Pack consists of:
- 3x 12.7mm(1/2in) worktop cutter
- 1x 12.7mm(1/2in) long series cutter
- 1x 6.35mm(1/4in) laminate trimmer
• The cutters are tungsten carbide tipped with a teflon coating
• They are suitable for use in natural timbers, particle board and fibreboard
• They have a wide range of applications such as engraving, grooving, rebating and shallow mortising
Trend intumescent cutter set
Cutting tool used to neatly cut grooves on doors or frames
• For either frame or door applications, with standard intumescent strip
• Neatly cuts grooves on doors or frames to accept intumescent strip which enables the formation of effective barriers to both fire and smoke
• By using alternative ball bearings diameters other seal thicknesses can be introduced
• Alternative bearings can be purchased to suit other thicknesses
• For 4.0mm thick and 10.0mm width intumescent strip
• D: 24 mm
• C: 10 mm
• B: 16 mm
• E: 4 mm
• Shank diameter: 6.35mm(1/4in)
Joint jig for use on joining timber and plywood together
• For fast and accurate joining of timber and plywood giving strong instant joints
• Solid hardened bushes with variable pitch of 29mm to 63mm
• Use on timber, MDF, plywood and blockboard
• Allows a variety of joints to be created individually
• Uses square drive self tapping screws
• Workpiece can be handled immediately after gluing and screwing creating time saving benefits
• No clamps required
Trend anglefix mitre guide
Basic mitre gauge for marking out angles
• Use for mitre cutting of frames, skirting, architrave and beading as well as basic marking out
• Halves angles to achieve correct cutting angle before cutting mitres
• Use for mitre cutting of frame, skirting (not tall skirting), architraves and beading as well as basic marking out
• Sets internal and external angles
Self-guiding tungsten carbide tipped, ideal for biscuit jointing
• This two wing self-guiding tungsten carbide tipped slotting cutter is ideal for biscuit jointing
• The set is supplied with three ball bearing guides to suit the three sizes of biscuits available
• A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly
• Shank diameter: 6.35mm(1/4in)
Trend digital angle ruler
Digital angle ruler
• 1000mm digital angle ruler that calculates angles quickly and accurately and is ideal for woodworking, construction, and machining
• Stainless steel rule with metric/imperial scale, scale length 500mm
• Measuring range from 0 deg to 360 deg, with accuracy of 0.3 deg
• Rule locking function
• Easy operation with two press buttons
Trend guide bush
Guide for use on router
• Guide bush guides the router when using a template
• Fits directly to Trend T5E and T9E, and some other light duty routers
• Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base
Interlocking gripping blocks 
• Pack of four interlocking gripping blocks that lock together to allow workpiece to be held in place when sanding, drilling and finishing
• Grips both workpiece and bench
• Lifts workpiece from bench, to allow complete access to every edge
• Anti-vibration, non-slip, non-marring rubber pads on both the top and bottom of the blocks
• Size when four blocks interlocked 173mm x 173mm
Trend router depth gauge
A metal rule depth gauge to set height of router cutters and saw blade
• A metal rule depth gauge to set height of router cutters and saw blades accurately
• For hand routers, router tables and saw benches 60mm wide aperture and accurate to 0.5mm
• 80mm measurement range
• Steel rule dual metric and imperial scale
• Self standing for setting cutter depth on router tables and low profile for backfence adjustment
Carbide tipped circular saw blades 
• A range of tungsten carbide tipped circular sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board
• Silverbraze to ensure tip is bonded securely to body
• Laser etched on reverse to European standard EN847-1/2
• High grade alloy steel plate body precision ground to maintain flatness
• Microgranular tungsten carbide tipped to allow cutting of abrasive materials
Screwdriver attachment to allow access to tight corners.
• 90 degree angled screwdriver attachment allows access to tight corners
• Quick change chuck ensure tool is held securely
• Use with bit holders, direct drive or insert screwdriver bits, hex drills and drill/countersinks
• Heat treated steel precision gears for maximum torque
• Die cast head with ball bearing guides for stability
Drill attachment used to drill and secure screws in tight spaces
• Drill and fixes in tight spaces
• Outer sleeve rotates allowing secure positioning
• Shaft swivels to 15 degree angle
• Accepts both insert bits and direct drive bits
Square drive bit. Ideal to use with Trend drill attachment
• No 2 Robertson square drive bit
• Square drive bit. Ideal to use with Trend drill attachment

Comprehensive range of high quality router bits and cutting bits from Trend Router Technology; the leader in router technology. Useful in completing a myriad of tasks and giving your projects a professional quality finish.